LocalSpindle of Illinois CNC Repair and Maintenance
CNC machine repair in Illinois, from local techs
Machining centers, lathes, controls, press brakes, lasers and the plant equipment around them, repaired on your floor, plus spindle rebuilds and servo motor rebuilds. Based in Chicago, with techs and stocked repair vans stationed around Illinois. Less downtime, more cutting.
- Fastest response available
- Chicago-based
- Stocked repair vans
- Fanuc & Siemens
Fastest response available
Machine down? Talk to a local tech
Tell us the machine, the control and the alarm or symptom. We’ll talk it through and send the nearest tech with a stocked van.
- Talk straight to a tech, not a call center
- The nearest stocked van gets the job
- Fanuc and Siemens controls, and most of the shop floor
Fastest response available
Home base is Chicago, with techs stationed around Illinois, so the nearest one heads to your shop instead of one from across the state.
Stocked repair vans
Our vans carry the meters, tools and common parts a repair needs, so most fixes don't wait on a second trip.
Fanuc & Siemens trained
Techs who know Fanuc and Siemens controls can work most of what's on a shop floor, old iron and new.
Repair, PM and sales
One local team for the breakdown, the maintenance plan that prevents the next one, and the next machine you buy.
Quick answerLocalSpindle of Illinois is a Chicago-based CNC repair and maintenance company with the fastest response available across Illinois. Our techs repair CNC machines, fabrication equipment and plant equipment on site across Illinois, handle spindle rebuilds and servo motor rebuilds, set up preventive maintenance, and help shops buy machines. We work Fanuc and Siemens controls and most brands on the shop floor. Call 773-692-0269.
Our services
Equipment we repair
From the machining center to the conveyor that feeds it. One local team for the whole floor.
CNC mill & machining center repair
Vertical and horizontal machining centers: axis faults, ATC jams, way lube, ballscrews, crashes and alignment.
CNC lathe & turning center repair
Turning centers, Swiss-types and lathes: turrets, chucks, bar feeders, sub-spindles and tailstocks.
CNC control & drive repair
Fanuc, Siemens, Heidenhain, Mazatrol and more: alarms, dead screens, lost parameters and drive faults.
Spindle repair & rebuild
Noisy, hot or vibrating spindles diagnosed on site, drawbar and taper work, and full spindle rebuilds when the bearings are done.
Servo motor repair & rebuild
Overload, overcurrent and encoder alarms traced to the real cause, drives repaired, and servo motors rebuilt with new bearings, seals and encoders.
Preventive maintenance
Scheduled PM for the machines you depend on: lube, filters, backlash, level, alignment and a written report.
Press brake & shear repair
Hydraulic and electric press brakes and shears: crowning, backgauges, light curtains, valves and cylinders.
Punch, turret & stamping press repair
Turret punches and mechanical or hydraulic stamping presses: clutch and brake, tooling stations, feeds and safety.
Ironworker repair
Hydraulic ironworkers back to punching, shearing and notching: pumps, cylinders, strippers and stations.
Band, cold & cutoff saw repair
Production band saws, cold saws and cutoff saws: blade tracking, guides, vises, feeds and hydraulics.
Laser & plasma cutter repair
Fiber and CO2 lasers and plasma tables: cut quality, motion, height control, chillers and gas delivery.
Waterjet repair
Intensifier and direct-drive pumps, cutting heads, abrasive feed and motion systems.
EDM repair (wire & sinker)
Wire threading, generator faults, dielectric and filtration, and accuracy problems on wire and sinker EDMs.
Grinder repair
Surface, cylindrical and tool grinders: wheelheads, hydraulics, way wear, chatter and finish problems.
Plate roll & tube bender repair
Plate rolls, section rolls and CNC tube benders: hydraulics, rolls, mandrels and controls.
CNC router repair
Wood, plastic and metal routers: spindles, vacuum tables, gantries, tool changers and controls.
Robot & automation cell repair
Machine-tending, welding and palletizing robots: faults, encoders, grippers, vision and safety circuits.
PLC & industrial controls repair
PLCs, HMIs, I/O and control panels: faults found, programs backed up, and lines running again.
Injection molding machine repair
Hydraulic, electric and hybrid presses: barrel heats, screws and checks, clamps, ejectors and controls.
Conveyor & packaging line repair
Conveyors, wrappers, case packers and plant equipment: drives, belts, sensors and controls.
Hydraulic & pneumatic repair
Pumps, valves, cylinders, accumulators and air systems: leaks, pressure loss, heat and slow motion.
Motor & VFD repair
Motors, VFDs and power components: trips, overheating, bearing noise and drive replacement or setup.
Not sure what's wrong?
Describe the symptom or read us the alarm. A tech will tell you honestly what it’s likely to be.
Why a local team
Local techs, not a national service contract
Big maintenance companies sell long contracts and staff your plant from far away. We work the other way.
| LocalSpindle | |
|---|---|
| Who answers | A tech who can talk about your machine, not a call center. |
| Who comes | The nearest tech, from a van stocked for the job. |
| What you sign | Nothing to get a repair. PM plans are built around your machines. |
| What you get after | A written summary: what failed, what we did, what to watch. |
| Who sells you the next machine | The same team that keeps it running. |
How it works
How a service call works
The same process on every call, so your supervisor always knows what’s happening and what comes next.
Call or text
Tell us the machine, the control and the alarm number or symptom. Text a photo of the screen if you can. You talk to a tech, not a dispatcher reading a script.
Triage by phone
Some problems end on the phone: a parameter, a reset sequence, a door switch. If not, we tell you what we suspect and what we’re bringing.
The nearest van rolls
The tech closest to your shop takes the job, with the meters, tools and common parts the problem is likely to need.
Find it and fix it
We trace the fault to its cause, explain it in plain words, and fix it on site when the part is on the van. If a part has to be ordered, you get the part number, the lead time and the price before we order.
Report and prevent
You get a written summary: what failed, what we did, what we’d watch. If the same failure is likely to come back, we’ll say so and suggest the maintenance that stops it.
Brands we service
Fanuc, Siemens, Haas, Mazak, Okuma, Amada, Trumpf and hundreds more
Techs who know Fanuc and Siemens controls can work most of what’s on an Illinois shop floor.
- Fanuc
- Siemens
- Haas
- Mazak
- Okuma
- Doosan
- DMG Mori
- Makino
- Hurco
- Amada
- Trumpf
- Bystronic
- Accurpress
- Cincinnati
- Hypertherm
- Sodick
- Allen-Bradley
- Motoman
- Engel
- Milacron
Preventive maintenance
Catch it before it stops you
Scheduled PM for each machine, with the same numbers measured every visit and a written report.
- Lube, hydraulics, filters and wipers
- Backlash, level, alignment and drawbar force
- Control backups and battery changes
- A written report for every machine
Machine sales
Buy from the people who fix them
New and used CNC machines, checked by our techs before you buy and set up on your floor.
- Machining centers and lathes
- Press brakes
- Pre-purchase condition checks
- Setup, leveling and first parts
Service areas
Local CNC repair across Chicagoland and Illinois
Home base is Chicago, and our techs and repair vans are stationed around the state, from the Chicago suburbs to Rockford, the Sauk Valley, Peoria, Springfield and Metro East. Small towns have machine shops too, so we take calls from every corner of Illinois.
Chicago & Cook County
DuPage County
Kane, Will & Lake Counties
Northern Illinois & Sauk Valley
Illinois Valley & Western Illinois
Central & Southern Illinois
CNC mills and machining centers, lathes, controls, servo drives, spindle rebuilds and servo motor rebuilds, plus press brakes, punches, ironworkers, saws, lasers, waterjets, EDMs, grinders, rolls and routers, and plant equipment like robots, PLCs, molding machines, conveyors, hydraulics, motors and VFDs.
Chicago. Our techs and stocked repair vans are stationed around Illinois, so the nearest tech takes your call.
Our techs work Fanuc and Siemens every week, plus Mitsubishi, Heidenhain, Fagor, Mazatrol, Okuma OSP, Haas, Hurco and older controls.
Yes. We set up PM schedules for each machine and leave a written report every visit. See maintenance plans.
Yes. We help shops buy new and used CNC machines and set them up. See machine sales.
Call 773-692-0269 or request service online. Have the machine, the control and the alarm or symptom ready.
Machine down?
Get the machine back to cutting
Call and talk to a tech about the machine, the control and the symptom. The nearest tech with a stocked van takes the job.
